Kulzer cara Print LEDcure Instrucciones De Uso página 34

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 69
Before this is executed, the following confirmation screen appears.
After confirming (YES) or cancelling (NO), you are returned to the Setup screen which you can exit by press-
ing 'ESC'. The settings are saved automatically.
INFO
GB
When the 'INFO' button is pressed, the following image appears:
-10-
The screen provides information on the status of the unit (hardware) and software version (Kulzer cara Cure
Guide and Firmware software). Press the 'ESC' button to exit the screen.
When the 'Service' button is pressed, a submenu appears in English:
This information is reserved for service personnel for service purposes (read only). Press the 'ESC' button to
exit the service area.
TEST
When the right button is pressed, a display test screen appears for 10 seconds and is only relevant for service
purposes, as well:
Press any button to cancel the test and return to the Main screen, program selection:

Publicidad

Tabla de contenido
loading

Tabla de contenido