Warranty And Limitations Of Liability - Beem MD-258BT Manual De Instrucciones

EN
Problem
The coffee runs very
slowly into the thermal
jug (6).
The coffee is too thin.
A large amount of
steam is produced in
the brewing process.
During use, an
unpleasant smell is
detected.

Warranty and Limitations of Liability

The warranty does not cover faults caused by incorrect handling, calcifi cation, damage or
attempted repairs. The same applies to normal wear and tear.
We do not accept any liability for damage or consequential damage resulting from:
• failure to follow the operating instructions
• non-designated use
• improper or unsuitable handling
• repairs which are not carried out properly
• unauthorised modifi cations
• use of outside parts or spare parts
• use of unsuitable additional parts or accessories
Keep the original packaging during the warranty period of the device so that the device
can be properly packaged up if it needs to be returned. The warranty claim will lapse if any
damage is caused during transport.
02442_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 28 02442_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 28
Possible cause
The drip stop is blocked.
The device is furred up.
The coffee powder used is too
fi nely ground.
Too much coffee powder used.
There is too much water in the
water tank (8).
The device is furred up.
The device is being used for the
fi rst time.
The device has previously been
descaled.
Fix
Clean the fi lter holder (9) with
drip stop.
Descale the device.
Use coffee powder with a
coarser grind.
Do not overfi ll the permanent
fi lter (8) / fi lter paper.
Pour only the quantity of water
required for the number of cups
you want into the water tank.
Descale the device.
A smell often develops when new
devices are fi rst used. The smell
should disappear once the device
has been used several times.
Rinse the device with clear water.
28
06.12.2019 11:35:02 06.12.2019 11:35:02