EN
Storage
Thoroughly clean the espresso maker again (see the "Clean-
ing and Care" chapter) to avoid possible mould formation.
Mould can cause spots and damage that can no longer be
removed / repaired.
Allow all accessories to dry completely and store them in a dry,
clean, frost-free place that is protected from direct sunlight and
cannot be accessed by children or animals.
Warranty and Limitations of Liability
The warranty does not cover faults caused by incorrect handling,
damage or attempted repairs. The same applies to normal wear
and tear.
We do not accept any liability for damage or consequential
damage resulting from:
•
Failure to follow the operating instructions
•
Non-designated use
•
Improper or unsuitable handling
•
Repairs which are not carried out properly
•
Unauthorised modifi cations
•
Use of outside parts or spare parts
•
Use of unsuitable additional parts or accessories
Keep the original packaging during the warranty period
of the product so that the product can be properly
repacked if it needs to be returned. The warranty claim
will lapse if any damage is caused during transport.
28