Remote Control; Remote Control With Ma001 - CESVA MI006 Manual Del Usuario

The MI006 can be controlled via the MI006 button and also through the following
methods:

Control with the MA001 remote control: It allows you to remotely start and
stop playback of the noise with just pressing one button. It has a coverage
range of 45 m.

Control with a PC: Allows remote control of the MI006 from a computer with
the BT002 wireless communication module and the software SF005 using the
Bluetooth wireless communication feature of the MI006 (Class 1 wireless
digital communication)

5.1 Remote control with MA001

The MI006 has the option to be remotely controlled (run/stop) with the MA001
remote control. This has two buttons. With the lower button (small one) the
MI006 can be controlled, with the upper button (big one), you can control the
AP602 amplifier of the omnidirectional sound source FP122.
To control the MI006 through the MA001 remote control the AN001 antenna
should be screwed into the antenna connector [2]. This antenna is foldable (see
9).
A single remote control simultaneously handles all noise sources with remote
control option that are fed, switched on and within the coverage range (45 m).
NOTE:

To replace the battery, remove the rear cover using a cross-head
screwdriver (Philips).
28

Remote control

AP602
MI006
5. Remote control
Chapter 5 Remote control
5