General Description; Scope Of Delivery - Parts List; Function Description; Overview - Parkside PLS 3000 A1 Traducción Del Manual De Instrucciones Original

The user or operator is responsible for ac-
cidents causing injury to other people or
damage to property.
The manufacturer cannot be held liable
for damage when the blower is not used
in conformity with its intended purpose or
due to incorrect operation.
A leaf vacuum is not intended for
wet conditions! Avoid wet materi-
als such as leaves and dirt, twigs,
branches, pine needles, grass,
earth, sand, mulch, cuttings, etc.
Do not use on wet lawns, grass
areas or fields. Misuse may lead
to congestion in the shredding unit
and lead to reduced functionality.
The machine may need to be com-
pletely dismantled and cleaned.
This work should be carried out by
a qualified service technician and
is not covered by guarantee.

General description

The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.

Scope of delivery - Parts list

Unpack the device and check for com-
pleteness. Dispose of the packaging mate-
rial properly.
- Electric Leaf Vacuum/Blower
- Blower pipe (2-piece)
- Suction pipe (2-piece)
- Carrying strap
- Collection bag
- Instructions for use

Function description

The electric leaf vacuum/blower has a
blowing/vacuuming unit for the blowing
and suction functions. In blowing mode,
you can quickly blow together fallen
leaves or blown them out of places that
are difficult to reach. In suction mode, the
leaves are shredded to save space, and
blown out of the ejector outlet into the col-
lection bag.
Refer to the following descriptions for a
functional description of the controls.

Overview

1 engine housing
A
2.1 T handgrip
2.2 handle
3 volume control
4 on/off switch
5 cable strain relief
6 power plug
7 protective cover
for suction intake
8 locking knob for blowing
aperture (not visible)
9 blower pipe (2-piece)
10 auxiliary handle
11a/b attachment eye
for carrying strap
12 carrying strap
13 screw with star grip for protecti-
ve cover of the suction intake
14 collection bag
15 collection bag carabiner
16 suction pipe (2-piece)
17 screw with star grip, suction
pipe
18 screw with star grip, additional
handle (not visible)
19 collection bag eyelets
C
GB MT
67