Removal Of Clogging And Blockage; Storage; Disposal And Protection Of The Environment - Parkside PLS 3000 A1 Traducción Del Manual De Instrucciones Original

GB MT
Removal of clogging
and blockage
Leaf material and fresh plant parts may
clog / block the device.
Cleaning the impeller wheel:
Pull out the mains plug!
There is a risk of injury!
1. Open the protective cover (
remove the suction tube (
2. Carefully remove residues or clogging
materials from the impeller wheel.
3. Check to make sure the impeller wheel
is easier to turn and is in undamaged
condition. Have our Service Centre re-
place a defective impeller wheel.
4. Close the protective cover (
screw the suction tube (
into place.
If the protective cover (
or the suction tube (
correctly screwed into place by
hand, it is not possible to operate
the device.
80
7) or
A
16).
A
7) or
A
16) back
A
7) and/
A
16) is not
A

Storage

• For storage purposes you can remove
the blow tube (
tube ( 16) and the catcher (
from the motor housing (
corresponding installation instructions
in the „Start-up" section).
• Store the device in a dry place well
out of reach of children.
Disposal and protection
of the environment
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with
domestic waste.
Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out and
thus recycled use can be implemented.
Ask our Service-Center for details.
• Defective units returned to us will be
disposed of for free.
• Throw the cut grass on the compost. Do
not throw it in the normal household
waste.
9) and/or the suction
14)
1) (see the