Oven Switching On And Off; Guidelines On How To Use The Appliance - Bartscher 296215 Manual De Instalación, Uso Y Mantenimiento

5.3.

Oven switching on and off

A) Start the automatic switch-off to turn on
the electrical connection.
B) Turn switch A to activate the oven
heating coils. The green control light (L)
will come on.
C) Turn the oven thermostat controller and
set to the temperature between 70 °C and
300 °C. When the heating coils are
activated, the white indicator light will
come on (W). When the oven reaches
required temperature the white indicator
light goes off.
Temperature °C
Time in minutes
A
Pos. 0
Pos. 1
5.4.

Guidelines on how to use the appliance

Longer interval in the use of the appliance
When you plan not to use the appliance for the
prolonged time, follow the instructions below:
1. Turn on the automatic switch-off to disconnect
from the mains;
2. Thoroughly clean the appliance and
surrounding areas;
3. Apply the vaseline oil on the stainless steel
surfaces;
4. Perform all maintenance works.
Guidelines on regular use of the appliance
To ensure correct use of the device follow the
guidelines below:
Use only accessories provided by the
manufacturer;
70 100 130
1' 30" 3' 4' 30'
B
Pos. 0
7
D) Turn switch (A) to activate or deactivate
the upper, lower, or both heating coils.
E) To switch the oven off turn the switch (A)
to position 0. Then turn the thermostat
controller (B) to position 0.
160 200 240
6' 8' 11'
W
Pos. 1
Use the heating plates only for heating pots,
do not heat food products directly on the
plates.
To save energy, use pots with appropriate
bottom of the higher diameter than the heating
plate.
Check if the oven door is properly installed.
Heat the oven before use.
Do not use the oven with partially
opened door.
In order to brown the product surface
put in on the upper grill and switch the upper
coil on.
The device and its vicinity should be always
kept clean.
Use only food grade cleaning agents.
ENGLISH
270 300
14' 17'
L
GB