Prior To First Use - Redmond RMC-151E Manual Del Usuario

10. Serving spoon
11. Measuring cup
12. Bowl removal tongs
13. Steam basket
14. Deep fry basket
15. Spoon/paddle holder
16. Power switch "0/I"
17. Power cord
18. Set of yogurt jars
Control panel A2
1. "Hour/Min" — to switch between the hour and minute adjustment modes;
to enable/disable the voice guide function.
2. "Time Delay" — to enable Time Delay and "MASTERCHIEF".
3. "Cancel/Reheat" — to interrupt the cooking programme, to clear the previ-
ous settings, to enable/disable the Reheat function.
4. "–" — to scroll through the menu (to move the cursor to the left), to reduce
the time and temperature value.
5. "+" — to scroll through the menu (to move the cursor to the right), to in-
crease the time and temperature value.
6. "Start / Keep Warm" — to switch the adjusted cooking mode / to disable
Keep Warm.
7. "Timer/Temp." — to switch to the cooking temperature or time adjustment
mode.
8. "Menu" — to select the cooking programme.
Display A3
1. Cooking programmes indicators.
2. Keep Warm and Reheat operation indicators.
3. Temperature value indicators.
4. Power indicator.
5. Voice guide indicator.
6. Cooking time adjustment mode indicator.
7. Adjustment mode and Time Delay mode indicator.
8. Operation indicator.
9. Time value indicator.
10. Cooking programme executive stage indicator.
I. PRIOR TO FIRST USE
Carefully remove the multicooker and its accessories from the packaging.
Dispose of all packaging materials.
Keep all warning labels, including the serial number identification label lo-
cated on the housing. The absence of the serial number will deprive you of
your warranty benefits!
After transportation or storage at low temperature allow the appliance to stay
at room temperature for at least 2 hours before use.
Wipe the housing of the appliance with a soft, damp cloth, wash inner bowl,
and let dry. Clean the appliance, to prevent extraneous odours during the first
use.
CAUTION! Do not use the appliance in case of any malfunction.
Place the appliance on a flat, stable, and hard surface away from wallpaper,
decorative coatings, or any other objects or cabinets that could be damaged by
steam, humidity, or high temperatures.
Before operating, make sure that the outer and inner parts of the multicooker
have no dents, cracks or any other visible damages. There should be no obstruc-
tions between the heating element and the bowl.
II. MULTICOOKER OPERATION
Non-volatile memory
The REDMOND RMC-151Е multicooker has non-volatile memory that guarantees
saving all the user's settings, including Time Delay and Voice guide settings for
2 hours in case of unexpected power failure. If the power supply is resumed
within 2 hours, the appliance will continue operation on the interrupted stage.
Voice guide
Thanks to the voice guide function the cooking technics in the REDMOND
RMC-151Е multicooker has become easy like never before. All the control
process is guided by the short prompt messages on the adjustments made and
current settings. The function is automatically enabled after switching the
appliance. To disable the function press and hold down "Hour/Min" in the cook-
ing programme selection mode. To reenable this function repress and hold down
the "Hour/Min" button.
To adjust the cooking time
The REDMOND RMC-151E multicooker provides cooking time adjustment for
the majority of the programmes. Time interval and range depend on the se-
lected cooking programme.
Time adjustment is not applicable for the "EXPRESS" programme.
1. To adjust the cooking time after the automatic programme selection press
the "Timer/Temp." button. The time indicator will appear on display. The
minute indicator will be flashing.
2. Press the "Hour/Min" button to select the hour or minute adjustment. The
selected value will start flashing.
3. Press "+" to increase the value and "–" to reduce the value. Press and hold
down the corresponding button to scroll through the digits.
To access the standby mode without saving the adjustments press the "Cancel/
Reheat" button.
In the "STEAM" and "SELF-CLEAN" programmes the cooking time starts to
count only after the appliance reaches the adjusted operating temperature.
For example, if you pour cold water and set the cooking time for 10 minutes
in the "STEAM" programme, the programme will run and countdown will start
only after water comes to a boil and enough steam is generated in the bowl.
Time Delay
The time delay function allows adjusting the time interval after which the
cooking programme starts operation. Time may be adjusted between 5 minutes
and 24 hours in 5 minute interval.
1. To adjust the time of delay after selecting the automatic cooking pro-
gramme press "Time Delay". The minute indicator will start flashing.
2. Press "Hour/Min" to adjust the hours or minutes. The selected value will
start flashing.
3. Press "+" to increase the value, and "–" to reduce the value. Press and hold
down the corresponding button to scroll through the digits.
4. To start the time of delay press and hold down the "Start / Keep Warm"
button for several seconds. The countdown before the programme start
will be displayed.
5. At the end of the countdown the adjusted cooking programme will start
operation.
To access the standby mode without saving the adjustments press the "Cancel/
Reheat" button.
Time Delay is not applicable for the "FRY" and "EXPRESS" programmes.
Avoid using the Time Delay function for perishable foods.
When adjusting the time of delay it should be taken into the consideration
that in some automatic programmes the adjusted cooking time starts running
only after the appliance reaches the adjusted operating temperature.
Keep Warm
This function automatically activates at the end of the cooking cycle and keeps
food warm at 70-75°С for 24 hours. The "Cancel/Reheat" indicator will lit up
solid, the function operation indicator and the direct countdown will be dis-
played.
To disable Keep Warm and switch to the standby mode press and hold down
the "Cancel/Reheat" button for several seconds.
Keep Warm is not applicable for the "YOGURT" and "EXPRESS" programmes.
In the "MULTICOOK" programme when adjusting the temperature lower than
80°C the Keep Warm function will be automatically disabled. It can be
manually enabled if necessary.
Preliminary deactivation of Keep Warm function
To enable Keep Warm at the end of the cooking programme operation is not
always desirable. Taking this into account the REDMOND RMC-151E multi-
cooker provides the possibility of preliminary deactiation of this function dur-
ing the start or operation of the cooking programme. To do so during the
cooking programme operation or in the time of delay press and hold down the
"Start / Keep Warm" button for several seconds. In the same manner the Keep
Warm function may be activated again.
Reheat
The REDMOND RMC-151E multicooker provides reheating cold meals. To do so:
1. Fill the bowl with food and position it inside the appliance.
2. Close the lid until it clicks into place. Plug in the appliance. Turn the
power switch "0/I" to the "I" position.
3. Switch the appliance into the cooking programme selection mode. Press
and hold down the "Cancel/Reheat" button for several seconds. An audible
signal will be heard, the "Reheat" indicator will be lit on display. The
timer will start the direct countdown.
The appliance will reheat the meal to 70-75°С and will keep it warm for 24
hours. Press and hold down the "Cancel/Reheat" button for several seconds to
disable Reheat if necessary. A long audible signal will be heard, the correspond-
ing indicators and button illumination will go out.
Thanks to Keep Warm and Reheat the multicooker may keep the food warm for 24
hours, though we do not recommend to leave the food warm for more than two-three
hours, because sometimes it may lead to the change of its taste qualities.
"MASTERCHIEF" function
Discover more opportunities for culinary art with a new function — "MASTER-
CHIEF"! If the "MULTICOOK" programme allows adjusting programme operation
parameters before its start, then using the "MASTERCHIEF" function you can
adjust the settings right during the cooking process with the feature of further
saving.
The "MASTERCHIEF" function is not applicable for the "EXPRESS" programme.
The "MASTERCHIEF" function allows adjusting cooking time and temperature
up to 10 times during the programme operation and recording the achieved
adjustment consequence instead of the source programme. The temperature
can be adjusted between 35 and 180°С in 1°С interval.
The cooking time can be adjusted between 1 minute and 15 hours in 1 minute
interval.
To protect the appliance from overheating the maximum operating time of the
programmes with the adjusted temperature above 140°С is limited to 2 hours.
Enabling/disabling Keep Warm without the temperature or time adjustment
is not considered as a separate adjustment.
The "MASTERCHIEF" function can be very useful especially when you cook
meals on the complex recipes, requiring combination of different cooking
programmes (e.g. cooking cabbage rolls, beef stroganoff, soup and different
types of pasta, jam, etc.).
GBR
RMC-151E
7