General Assembly Information; Assembly Steps - Tunturi Cardio Fit Cross C30 Manual Del Usuario

The package contains the fasteners as
shown in figure.
If a part is missing, contact your dealer
GENERAL ASSEMBLY
INFORMATION
WARNING
• Assemble the equipment in the given
order.
• Carry and move the equipment with
at least two persons.
CAUTION
• Place the equipment on a firm, level
surface.
• Place the equipment on a protective
base to prevent damage to the floor
surface.
• Allow at least 100 cm of clearance
around the equipment.
Refer to the illustrations for the correct
assembly of the equipment.
User manual • Cardio Fit Cross C30

ASSEMBLY STEPS

Assembly step 1
• Fit front stabilizer by using the shown
hardware.
• Fit rear stabilizer by using the shown
hardware.
Remark:
First put all screws/ bolts in correct place
before tightening them fully.
Assembly step 2
• Fit tension control knob to front post.
• Connect the wires from upright tube
and main frame and hook up the
tension cable as shown in pictures
GB
5