Sauder Office Port Hutch 408292 Manual Del Usuario página 5

Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (V) into the large holes in the RIGHT
UPRIGHT (C) and LEFT UPRIGHT (D). Repeat this step for
the TOP (G2), UPPER SHELF (H), LOWER SHELF (I),
and BRACE (JJ).
(20 used)
www.sauder.com/services
Do not tighten the TWIST-LOCK® FASTENERS in this step.
V
C
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1761
to watch a video on how to assemble your unit.
D
408292 Page 5