Sauder Office Port Hutch 408292 Manual Del Usuario página 9

Step 5
Fasten the RIGHT UPRIGHT (C) and LEFT
å
UPRIGHT (D) to the UPPER SHELF (H). Tighten
four TWIST-LOCK® FASTENERS.
D
Surface without TWIST-LOCK® FASTENERS
www.sauder.com/services
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Finished edge
H
C
408292
® FASTENER
Dowel end
Page 9