Operating DEEBOT
During the first cleaning, please supervise DEEBOT and assist it should
there be a problem.
1
Start
2
Pause
Note:
glowing after the robot is paused for
a few minutes. Press the AUTO Mode
Button on DEEBOT to wake up the robot.
3
Return to Charge
Pressing
DEEBOT back to the Auto-Empty Station.
* When Auto-Empty Station is connected
The robot's Control Panel stops
for 3 seconds to send
to power, DEEBOT automatically
returns to the station to charge and
empty the Dust Bin as it needs.
OZMO Mopping System
Note:
To prolong the service life of the reservoir, it is recommended
1
to use purified water or softened water for OZMO mopping system.
Note:
When DEEBOT is mopping, DEEBOT automatically detects
2
the carpet and keeps away from it. If you need to clean the carpet,
please uninstall the mopping pad plate first.
OR
Click
11
EN