Accessories (Optional) - STEINEL HF 3360 DALI Información

Dazzle guard
This product is equipped with an integrated dazzle guard. If blinded by extraneous
light, this puts the sensor into a brightness-related evaluation mode for 60 s.
(➔ "13� Troubleshooting").
LED function
– Normal mode: LED stays OFF
– Test mode: LED lights up on detecting movement
– Remote control: LED flashes approx. 10 times per second
– Permanently ON/OFF: LED ON
Reach setting (Fig� 6�1)
Continuously adjustable
– Control dial set to maximum = max. reach (approx. Ø 8 m)
– Control dial set to minimum = min. reach (approx. Ø 1 m)
Reach diagram (Fig� 6�2)
Time setting (Fig� 6�1)
The time you want the connected lamp to stay ON for is infinitely adjustable from
approx. 5 sec to a maximum of 15 min. Any movement detected before this time
elapses will restart the timer.
7� Accessories (optional)
User remote control RC5 EAN
Additional functions RC5
– Light ON/OFF 4 h
– User reset
– 100 h burn in, 4 h light ON press for ≥ 5 s
– DIM1 - / DIM1 +
– Save scene 1
– Activate scene 1
– Save scene 2
– Activate scene 2
Service remote control RC8 EAN
Additional functions RC8
– Time setting CH1
– Test / normal mode
– Light-level setting: teach
– Night-time operation
– Daylight operation
– Teach-IN
24
– Reset
– Basic brightness: OFF, night, 1 = 10% ... 6 = 60%, press for ≥ 5 s
Smart Remote EAN 4007841 009151
– Replaces remote controls RC5 and RC8
– Control via smartphone or tablet
– Load appropriate app and connect via Bluetooth
– Identify the sensors and read parameters
Additional functions Smart Remote
– Reach: min, 1 – 100%
– Time setting: 5, 10, 15....60 s – 60 min
– Twilight setting: 2 - 1000 lux
– Basic brightness: ON, 10 – 30 min
– Basic brightness level: 10% - 50%
– Main light level: 50% - 100%
– Initial state: behaviour after applying the light ON/OFF supply voltage
– Normal sens
– Low sens
– Burn in
– Sensor
Detailed descriptions are provided in the operating instructions for the particular
remote control.
8� Operation / maintenance
The sensor is suitable for switching on a light automatically. The unit is not suitable
for burglar alarm systems as it is not tamperproof in the manner prescribed for such
systems. The surface can be cleaned with a damp cloth (without detergents) if dirty.
9� Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in
an environmentally compatible manner.
Do not dispose of electrical and electronic equipment as domestic waste.
EU countries only:
Under the current European Directive on Waste Electrical and Electronic Equipment
and its implementation in national law, electrical and electronic equipment no longer
suitable for use must be collected separately and recycled in an environmentally
compatible manner.
25