z
Turning ISC (Integrated Sensor Control) ON/OFF
1. Press
to turn ISC ON.
(
will indicate that the ISC system is ON. When gas, smoke, or higher than
normal room temperature is detected, fan will automatically turn ON. Fan will turn to its
highest speed and decrease speed until all gas and smoke are eliminated.)
2. Press
to turn ISC OFF.
z
Turning Lights ON
(Light control is separate from ON/OFF control. Turning power off will not turn lights off.)
1. Press
to turn halogen lights ON.
(Each press of
z
Setting Delay Mode
(Delay Mode will only turn off the fans. Other functions that are active will not be turned off.)
1. Press
until
2. Press
or
3. Press
until none of the icons are flashing. Press
4. When countdown reaches 00:00, a warning sound will be emitted and fans will turn off.
z
Setting Timer Mode
1. Press
until
2. Press
or
3. Press
until none of the icons are flashing to begin timer.
(When countdown reaches 00:00, a warning sound will be emitted.)
will cycle the light intensity through low, high, and off.)
icon flashes
to set up the time for delay shut down by mm:ss.
icon flashes.
to set the desire time in the timer mode by mm:ss.
10
to start delay shutdown.