Metz SCA 3102 M5 Manual Del Usuario página 34

The switch positions on the SCA 3102 are
irrelevant, i.e. have no effect.
Canon Powershot Pro 70
TTL flash mode:
Setting on the mecablitz:
TTL or EM (Easy Mode TTL)
Setting on the SCA 3102:
The switch position is irrelevant.
Setting on the camera:
Full auto mode (green square) or "P".
"Automatic" must be selected in the camera's
menu when in the "P" mode!
Automatic flash mode A:
Setting on the mecablitz: A (Automatic)
Adjust the aperture on the mecablitz according to
the preselected camera aperture. We recommend
a film speed setting of ISO 200/24° on the camera.
But any film speed can be selected to match the
shooting conditions.
Setting on the SCA 3102:
The switch position is irrelevant.
Manual flash mode M:
Setting on the mecablitz:
M (manual flash mode)
Set the "P" mode on the camera. Select in the
camera's menu an aperture that matches the
flash-to-subject distance (see aperture calculator
or LC-display of the mecablitz).
Setting on the SCA 3102:
The switch position is irrelevant.
34