Preparing Coffee-Milk Specialties - SEVERIN S2 One Touch Instrucciones

Fig. 4: Adding beans
3. If desired, you can use the
• change the coffee strength.
• change the water quantity.
NOTE!
To prepare the coffee specialty with your own settings,
press the operating control until
'7.2 Making individual settings for coffee preparation' on
page 15)
4. Press the e-Select.
The desired coffee specialty is prepared.
Â
5. If you would like to change the coffee quantity during dispensing, turn the e-
Select while the coffee is being dispensed.
Version 1 2011-04-18

6.3.2 Preparing coffee-milk specialties

is displayed next to
To prepare a cappuccino, a white coffee or a latte macchiato, there must be enough
beans in the bean container and enough water in the water tank. Also place a contain-
er fi lled with milk (e.g. SEVERIN milk cooler) next to the device.
1.
Fig. 5: Placing the cup underneath and adjusting the dispenser height.
The display shows:
Â
coffee quantitY
and under that, a bar with the set quantity in „ml". The coffee dispensing
will stop automatically after the selected quantity has been prepared. It
can also be stopped early by pressing the e-Select.
NOTE!
Coffee specialties prepared with milk are best if the milk is
chilled to refrigerator temperature.
Plug the milk tube onto the connection on the coffee-milk dispenser and hang the
other end of the tube in the milk container (Fig. 6).
US
11