SEVERIN S2 One Touch Instrucciones página 12

US
Fig. 6: Connecting the milk tube
NOTE!
Make sure that the tube is submerged in the milk so that
the milk can be drawn correctly by the device.
2. Place a cup on the cup tray below the coffee-milk dispenser of the device and
adjust the height of the coffee-milk dispenser to the cup height (Fig. 5).
3. By turning the e-Select, select
, or
fee milk froth milk
4. If desired, you can
• change the coffee strength.
• change the water quantity.
• change the milk-milk froth quantity.
12
,
caPPuccino latte macchiato
.
5. Press the e-Select.
,
white cof-
The desired coffee specialty is prepared.
Â
6. If you would like to change the milk quantity during dispensing, turn the e-Select
while the milk is being dispensed.
The display shows:
Â
quantitY
and below this, a bar with the set milk dispensing time in seconds.
7. If you would like to change the coffee quantity during dispensing, turn the e-
Select while the coffee is being dispensed.
Fig. 7: Tipping over the powder dosing chamber
NOTE!
To prepare the coffee specialty with your own settings,
press the operating control until
('7.2 Making individual settings for coffee preparation' on
page 15)
is displayed next to
Version 1 2011-04-18