Audio File Transmission; Speaker Line Surveillance Configuration/Calibration By Software - Optimus NOVA-500 Manual De Instalación Y Funcionamiento

NOVA
Voice Evacuation System
5.5. AUDIO FILE TRANSMISSION
This menu is used to transfer messages between PC and NOVA‐500.
In order to load the message press mouse right button over the left screen and then Add
information... Next, select the folder, the message and press Open. You can also Refresh or
Remove the messages in the same way.
Once message is selected, chose its type on the right screen and press >> to transmit it.
You can see existing messages of each type on the right screen by pressing mouse right button over
it and then Refresh.
IMPORTANT NOTE: Message format must be *.wav 16 bits 48/44/22kHz Stereo.
5.6. SPEAKER LINE SURVEILLANCE CONFIGURATION/CALIBRATION BY
SOFTWARE
This menu is used to check the initial impedance value for speaker lines and set its parameters.
NOVA Version 1.0 Page 27 of 34