Taurus 912800 Manual Del Usario página 8

3.13. Programs and LCD Panel
BLEND
HEAT
CHUNKY:
When the ' ' mark on the LCD screen lights up, It
means the motor unit is set to the chunky setting.
This is the default setting.
•The temperature area will show the current tem-
perature and will show the temperature increasing to
until the pre-set temperature is reached. The pre-set
temperature is 100 C.
o
•When the program is complete you will hear a
beep.
•The pre-set heating time will be 30 minutes.
•The pre-set blending time will be 5 seconds.
•When the program is complete you will hear a
beep.
SMOOTH:
When the' ' mark on the LCD screen lights up, It
means the motor unit is set to the smooth setting.
•The temperature area will show the current tem-
perature and will show the temperature increasing to
until the pre-set temperature is reached. The pre-set
temperature is 100 C.
o
•The pre-set heating time will be 30 minutes.
•The pre-set blending time will be 3 minutes.
•When the program is complete you will
hear a beep.
BLEND:
When the' ' mark on the LCD screen lights up, It
means the motor unit is set to the BLEND setting.
•Press the "m" button until the triangle reaches the
blend function.
•The display will show the following:
•TEMP - 0
•TIME - 00:00
•SPEED -
•Turn the ON/OFF button, selecting speed 1 to 5.
The speed will be shown in the SPEED area by
increassing 1 to 5 rectangles.
•No need to set time or temp on this setting.
HEAT:
When the ' ' mark on the LCD screen lights up, It
means the motor unit is set to the simmer setting.
•Press the "m" button until the triangle reaches the
HEAT function.
•The TEMPERATURE will blink and you will
have to enter the desired cooking tempera-
ture by using the +/- buttons. You can set a
temperature from 0 to 100
•Then press the M button and the TIME
button wil blink and you will have to enter
the desired cooking time by pressing the
+/- buttons. You can set a maximum time of
30 minutes.
•Now you just have to turn the ON/OFF button on
any place.
•The TEMPERATURE are will show the tem-
perature increasing.
•The TIME area will show the time count-
down.
•There will be NO BLENDING.
•When the program is complete you will
hear a beep
TEMP:
Temperature Display.
You can set the desired temperature
The temperature will display on the LCD next to the
'TEMP' mark.
TIME:
Time Display
You can set the desired time of operation.
The time will display on the LCD next to the "TIME"
mark.
SPEED:
The unit has variable speed control.
ON/OFF buttons: move the knob from the OFF/ON
position towards the MAX.
'P' :Pulse function:
This unit has a Pulse function. This can be used
when you want complete control of chopping/
blending.
C.
o