Festo CMMD-AS Serie Manual Del Usuario página 17

1 User instructions
Intended use
The CMMD-AS series of servo positioning controllers are
intelligent AC servo dual converters for activation of
permanent-magnet-excited synchronous servo motors of
the EMMS-AS series.
The master controller (PLC/IPC) is connected via one of the
following controller interfaces:
– Digital inputs/outputs
– PROFIBUS DP
– CANopen
– DeviceNet
Commissioning and parametrisation are carried out:
– with the FCT software package and the CMMD-AS
plug-in via the RS232 interface.
Note
This brief overview is part of the documentation
package. It serves only as initial information and does
not replace the complete documentation, which is
contained as a PDF file on the supplied CD-ROM. The
latest version can also be downloaded from our
homepage (www.festo.com).
• You must observe the information and the safety
instructions in the complete manual for the motor
controller.
• Please consult your local Festo Service or write to the
following e-mail address if you have any technical
problems:
Festo P.BE-K-CMMD-AS 1002NH English
service_international@festo.com
17