Safety Instructions - LaserLiner AC-Tracer Manual Del Usuario

Completely read through the operating instructions, the 'Warranty and Additional
!
Information' booklet as well as the latest information under the internet link at the
end of these instructions. Follow the instructions they contain. This document must
be kept in a safe place and passed on together with the device.
Function / Application
Cable tracer set with transmitter and receiver
– Fast tracing of coherent electrical circuits.
– Location of lines in coherent, live electrical circuits.
– Detection of fuse circuits in live installations.
– Transmitter power supply directly from power cable to be tested
= measurement under operating conditions.
– Socket adapter for direct and fast testing in building installations.
– E27 lamp adapter for direct and fast testing in lamp circuits.

Safety instructions

– The device must only be used in accordance with its intended purpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise invalidate
the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or
significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery
charge is weak.
– Clean and dry the device before use.
– This device is to be used in enclosed spaces only; do not expose to moisture or rain
as this may result in electric shock.
– If you are working with voltages higher than 24 V/AC rms / 60 V/DC, exercise extreme
caution. Touching the electrical conductors at such voltages poses a risk of life-
threatening electric shocks.
– If the device comes into contact with moisture or other conductive-residue, work must
not be carried out under voltage. At and above voltages of 24 V/AC rms / 60 V/DC,
the presence of moisture creates the risk of life-threatening electric shocks.
– Before taking any measurements, make sure that both the area to be tested
(e.g. a line), the test device and the accessories used (e.g. connection cable) are
in proper working order. Test the device by connecting it to known voltage
sources (e.g. a 230 V socket in the case of AC testing).
08
EN