Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.1.4 s
hAft receptAcle
On production stop place shaft in the appropriate shaft
receptacle (type STM).
On prolonged interruption of work detach shafts
and hand tools and store shaft straight.
When the tool is not being used unplug the power
connector.
3.2 A
BrAsiVes
Speed rating on the abrasive is equal to or greater
than the speed adjusted on the machine.
Exclusively abrasives from the SUHNER catalog
are to be used.
Threat and store abrasives appropriately.
Damaged abrasives discs may not be used.
3.3 «s
g28»
tep
sAfety deVice
The «step» safety device services for stopping the hand
tool drive.
Fit STEP device on the shaft.
36
Connect hand tool to the shaft.
Plug the connector into the outlet socket and secure with
clasp.
3.3.1 t
Press key «on/off».
(
)
The edge of the keypad lights up: The machine can be
option
operated with the «step» safety device only.
Pre-select speed with keys «-/+».
Confirmation: Press «enter» key.
«run» start key.
«
»
urn on
step
sAfety deVice
Push latch forward and completely press down
lever. The start can only be initiated if the lever is
pressed down.
Publicidad
Tabla de contenido
