jbc ADVANCED JT 7000 Serie Manual De Instrucciones página 3

ENGLISH
SPECIFICATIONS
The JT 7000 is a hot air generating station intended
for repair work involving electronic circuits with
SMDs of any size.
- JT 7000 230V
- JT 7000 120V
JT 7000 can also be supplied without extractors
nor protectors:
- JT 7000 230V WE
- JT 7000 120V WE
The station's components
- Control Unit with 900 W heater
- JT 8700 heater stand
- Extractor stand
- Set of 5 protectors (Fig. 1, page 47)
- Set of 5 extractors (Fig. 2, page 47)
- 2 tripods for the protectors (Fig. 1, page 47)
- Set of 4 suction cups
- 3 nozzles
In order to make the nozzles removal easier, the
stand has a special bushing. (Fig. 3, page 47).
- Suction tube with connectors
- Pedal with cable and connector
- Spare filters
- Instruction manual
Control Unit technical specifications
- Temperature selection from 150 to 455°C (300 to
850°F).
- Accuracy of selected temperature: ± 5%
- Air flow regulation: 6-45 l/min
- Station's maximum power: 900W
- ESD protected housing.
Typical surface resistance: 10
- Complies with CE standards on electrical safety,
electromagnetical compatibility and antistatic
protection.
- Weight of complete unit: 9.5 kg (24 lbs)
Ref. 7000200
Ref. 7000100
Ref. 7010200
Ref. 7010100
Ref. 0828700
Ref. 0932845
Ref. 0930110
Ref. 0932330
Ref. 0964551
Ref. 0786620
Ref. 0825400
5 11
-10 Ohms/square
2
Safety measures
- Incorrect use of this tool may cause fire.
- Be cautious when using the tool in places
where inflamable products are stored.
- Heat can fire up inflamable products even
when they are not at sight.
- Do not use when the atmosphere is explosive.
- Place the tool back on its stand in order to let
it cool down before you store it.