jbc ADVANCED JT 7000 Serie Manual De Instrucciones página 7

ENGLISH
Soldering Iron 2210 ref. 2210000 for great
precision tasks, like SMD solders, etc.
Soldering Iron 2245 ref.2245000 for general
soldering tasks in professional electronics.
These soldering irons have a wide range of
cartridges with different models of tips. The
cartridge 2245-009 and 2245-010 are specially
designed for soldering SMD circuits of the
QFP and PLCC types.
Solder wire with a diameter of between 0.5 and
0.7 mm should be used.
6 Depending on the nature of the component to be
soldered, use soldering paste together with our
hot air station TE 5000, which gives very
accurate air-flow regulation, between
4 and 11 l/min.
MAINTENANCE
Exchanging the heater.
Turn off the station.
Use a wrench to unscrew the cover.
Move back the spring and the cover. Pull the
connector from the socket to disconnect the heater
from the station.
O-ring ø17 x ø1,8
Follow this process inverted to re-connect the heater.
6