Electrical Connection - Astralpool LumiPlus Monocolour-DMX MINI Manual Para La Conexión Eléctrica

ENGLISH
IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be im-
plemented for installation and start-up. Therefore, the installer as well as the user must read the instructions before
beginning installation and start-up.
Keep this manual for future reference.
To achieve optimum performance of the Projector LumiPlus Mini Monocolour -DMX, follow the instructions provided below:

1. ELECTRICAL CONNECTION

The projectors are supplied with a 2-wire 1.5mm2 Cu H07RNF cable.
This projector has been designed to operate only with a DMX control and with the DMX Mini power supply from AstralPool
(code 52142). It doesn't work with any other control system.
2. CONTROL SYSTEMS OF THE MONOCOLOUR - DMX LED PROJECTORS
The Mini LED projectors use 1 DMX channel.
The configuration of the DMX address should be performed from the DMX power supply of code 52142.
The DMX power supply 52142 allows to connect up to 9 Mini LEDs Monocolour-DMX projectors with independent chan-
nels.
This DMX power supply is responsible for adapting the input of 230V~AC to
The 6 outputs available are internally connected together, therefore it does not matter to which of them the projectors are
connected.
See manual of the DMX mains lead code 52142 for information regarding how to assign
DMX addresses to each Mini LED projector and how to configure a system.
24V DC.
The connection has no polarity
2