Rain Bird TBOS Manual Del Usuario página 8

english
Possible cause: The On-off Mode is activated
(X on the sprinkler icon
Solution: Permit irrigation by deactivating the
On-off Mode.
Possible cause: Another station is in operation.
Solution: Use the manual station option to turn
off that station.
Possible cause: The battery is weak.
Solution: Replace the battery.
Possible cause: A wire connection is faulty.
Solution: If you are using King wire connectors,
gently pull on the wires to make sure
they are secure. If the wires are loose,
cut the wires. Strip 0.5 in. (1.25 cm.) of
the insulation off the wires. Twist the
wires, then push the wires into a new
King connector and twist the connec-
14
TBOS
).
™
Control Module
tor around the wires. Gently pull on
the wires to make sure they are
secure.
If you are using 3M DBM wire con-
nectors, make sure the wires have not
been stripped. Unlike other wire con-
nectors on the market, DBMs are
designed to cut through the insula-
tion to make a water-resistant cou-
pling without removing the insula-
tion. Push the wires all the way into
the wire connector. Be sure to crimp
the black cap all the way down (gel
should ooze out of the top) to ensure
a water-resistant connection. Gently
pull on the wires to make sure they
are secure. If the insulation has been
stripped, recut the wires and repeat
the steps above.
15
english