baltur BGN 200P Manual De Instrucciones página 57

INSTRUCTIONS FOR HONEYWELL GAS VALVES UNIVERSAL GAS
VALVES TYPE: VE 4000A1 (....A .... = Opening - Closure, rapid)
The VE 4000A1 valves are Class A
solenoid valves, normally closed.
They may be used as ON/OFF
valves in the supply trains with
Natural Gas, Manufactured Gas
or GPL, on burners or combustion
installations.
They are provided with M.I. and CE
Approval for EN161.
INSTRUCTIONS FOR HONEYWELL GAS VALVES UNIVERSAL GAS VALVES
TYPE: VE 4000B1 (....B.... = Opening - Closure, rapid. Flow regulator)
FEATURES
- Valve normally closed
- With flow regulator
- Rapid opening and closing
The VE4000B1 valves are Class A
solenoid valves, normally closed.
They may be used as ON/OFF val-
ves in the supply trains with Natural
Gas, Manufactured Gas or GPL, on
burners or combustion plants.
They are provided with M.I. and CE
Approval for EN 161.
ADJUSTMENT
For models VE 4000B1
(see fig. 1)
FEATURES
- Valves normally closed
- Without flow regulator
- Rapid opening and closing
Adjustment to the flow
- Remove the cover from the upper
section of the coil.
- Insert a hexagonal Allen key into
the central section at the top.
- Turn clockwise to decrease the
flow or anti-clockwise to increa-
se it.
- Replace the cover and tighten it.
ATTENTION
- The adjustment must only be car-
ried out by qualified personnel.
- For valve closure the tension at the
coil terminals must be 0 volts.
- The flow regulator of the VE 4100
valve series is situated in the
lower section.
55 / 112
0006081054_200810
N° 0002910370
Rev. 25/06/96
N° 0002910380
Rev. 13/10/95
fig.1