Assembly - Generac GP Serie El Manual Del Propietario

Accessories
Item
Main Unit
Owner's Manual
Liter Oil SAE 30
Handle Assembly (A)
Never-flat Wheel (B)
Frame Foot (C)
Product Registration Card
Service Warranty
Emissions Warranty
20' Power Cord (if
equipped)
Battery Charger (electric
start models)
Hardware Bag
Rubber Feet (D)
1/2" Axle Pin (E)
Cotter Pin (F)
1/2" Flat Washer (G)
Hex Flanged M6 Nut (H)
Hex Flanged M8 Nut (J)
M8 Bolt (Long) (K)
M6 Bolt (Long) (L)
NOTE: The generator is shipped with only one
(1) hardware bag, assembly A or B.
3. Call Generac Customer Service 1-888-
GENERAC (1-888-436-3722) with the unit
model and serial number for any missing
carton contents.
4. Record model, serial number, and date of
purchase on front cover of this manual.

Assembly

Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Call Generac Customer Service at 1-888-
GENERAC (1-888-436-3722) for any assem-
bly issues or concerns. Please have model
and serial number available.
The following tools are required to install the
accessory kit.
• Needle nose pliers
• 10mm socket
• 8mm and 13mm box wrenches (2 each)
8
Qty.
1
1
1
1
2
2
3
1
1
1
1
Qty.
Assy. A Assy. B
2
2
2
2
2
6
6
2
WARNING
(000100a)
NOTE: The wheels are not intended for over-
the-road use.
See Figure 2-10
Install wheels as follows:
1. Slide axle pin (E) through the wheel (B),
wheel bracket on frame, and 1/2" flat
washer (G).
2. Insert cotter pin (F) through axle pin (E).
Bend tabs (of cotter pins) outward to lock
into place.
Install frame foot and rubber bumpers as fol-
lows:
1. Slide hex head bolts (L) through rubber
bumper (D), then through frame foot (C).
2. Slide hex head bolts (K) through holes in
frame rail.
3. Slide frame foot (C) onto hex head bolts
(K). Install locking flange nuts (J).
Install handle as follows:
1. Slide long bolts (K) through handle bracket
and handle (A). Install hex nuts (J).
.
J
Qty.
0
2
2
2
A
0
5
5
0
Figure 2-10. Wheel & Handle Assembly (A)
.
A
Figure 2-11. Wheel & Handle Assembly (B)
and Figure
K
C
J
D
K
J
C
J
D
Owner's Manual for Portable Generator
2-11.
F
G
B
E
K
H
000916
L
F
G
B
E
K
000884