Setting The Cutting Angle; Setting The Cutting Depth; Working With The Circular Saw; Maintenance And Cleaning - Parkside PHKSA 12 A1 Manual De Instrucciones

Setting the cutting angle

You can select the cutting angle using the cutting
angle scale .
■ Undo the wing screw
preselector. Set the desired angle on the cutting
angle scale using the top edge of the raised
black metal part (see fig. C). Retighten the wing
screw .
Fig. C: Setting the cutting angle to 45 degrees

Setting the cutting depth

NOTE
► Select a cutting depth of approx. 3 mm more
than the thickness of the material. This ensures
that you achieve a clean cut.
♦ Undo the locking screw
cutting depth on the cutting depth scale
using the reference marks (see arrow in fig. D).
Retighten the locking screw
Fig. D: Setting the cutting depth

Working with the circular saw

1. Switch on the appliance – as described in
"Switching on and off" – and then place it
with the front edge of the base plate
material.
2. Align the machine using the rip fence
using a marked line.
│ GB │ MT
■ 54
of the cutting angle
0
and set the desired
.
on the
or by

Maintenance and cleaning

WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
The cordless hand-held circular saw is mainte-
nance-free.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Never allow liquids to get into the appliance.
■ Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
■ The blade guard must always move freely and
close automatically. Therefore, keep the area
around the blade guard clean at all times. Re-
move dust and chips by blowing them out with
compressed air or with a brush.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
► Replacement parts not listed (such as batter-
ies, battery charger) can be ordered via our
service hotline.
PHKSA 12 A1