Introduction; Intended Use; Features; Package Contents - Parkside PHKSA 12 A1 Manual De Instrucciones

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This hand-held circular saw (hereinafter "appli-
ance") is designed for longitudinal, cross and mitre
cuts in firmly supported chip board, plastics and
lightweight construction materials. Any other uses
of or modifications to the appliance are deemed
to be improper usage and may result in serious
physical injury. Not for commercial use.

Features

Figure A:
Safety lock-out
ON/OFF switch
Release button for battery pack
Battery pack
Cutting depth scale
Locking screw
Base plate
Blade guard
Wing screw for rip fence slot
Spindle lock
Chip ejector
Figure B:
Battery display LED
Overload warning
Vacuum adapter for dust extraction
Cutting angle scale
Wing screw for cutting angle preselector
Rip fence
LED work light
Rip fence slot
│ GB │ MT
■ 46
Clamping flange
Tensioning screw
Release lever for the blade guard
Saw blade
Hex key
Figure C:
Charging status display LED
Control LED
High-speed charger

Package contents

1 cordless circular saw
1 high-speed battery charger
1 battery pack
1 guide fence
1 vacuum adapter for dust extraction (2 pieces)
1 hex key
1 saw blade (pre-assembled)
1 operating manual

Technical data

Cordless circular saw: PHKSA 12 A1
Rated voltage:
Rated idle speed:
Saw blade:
85 mm
Max. cutting depth:
max. 26 mm
Battery pack: PAP 12 A2
Type:
Rated voltage:
Capacity:
Cells:
(DC)
12 V
n 1400 rpm
0
1x Ø 85 mm x 1.1 mm
x Ø 15 mm, 20 teeth
At 0°: 26 mm
At 45°: approx. 17 mm
LITHIUM ION
(DC)
12 V
2000 mAh
3
PHKSA 12 A1