Harbor Breeze E-AM54AI5LKL Manual Del Usuario página 13

FINAL INSTALLATION
8.
Remove three screws from switch housing plate (F).
Connect female plug from switch housing (H) to
male plug from motor housing (E), matching up the
colors on the male plug with the colors on the female
plug for correct fit.
Align holes in switch housing (H) with holes in switch
housing plate (F). Re-insert screws that were
previously removed and tighten all screws securely
with a Phillips screwdriver. (Fig. 8)
Note: If you are not using the light kit, please
proceed to Step 11 instead of continuing with Step 9.
Remove socket rings (U) from sockets. Use these
9.
socket rings (U) to attach shades (I) to light kit fitter
(G). (Fig. 9)
Install three candelabra base 40-watt max. bulbs
10.
(N) included. (Fig. 10)
Important: When you need to replace bulbs, please
allow bulb(s) and light kit fitter (G) to cool down
before touching them.
8
9
I
10
13
F
H
G
U
N
G
G