Dismantling the juicer
If you wish to dismantle the juicer, e.g. to clean it, proceed as follows:
1) Remove the mains plug 8 from the socket.
2) Open the clamps 4.
3) Remove the lid 3 with the pusher 1.
4) Lift up the juice tank 5 carefully. This disengages the filter w from the drive
shaft e. You can now remove the filter w from the juice tank 5.
Cleaning and care
DANGER – ELECTRIC SHOCK!
Always remove the mains plug 8 from the wall socket before cleaning the
►
appliance.
WARNING! RISK OF INJURY!
Always pull out the mains plug 8 before fitting or removing accessories.
►
CAUTION! PROPERTY DAMAGE!
To avoid blockage of the juice outlet 6 and/or damage to the appliance,
►
all fruit and vegetable pulp must be regularly cleaned off the appliance
and accessories. Also clean after every use.
►
Do not use any aggressive cleaning agents to clean the juicer. The appliance
and its accessories may not be cleaned in boiling water.
NOTE
►
Soiling or overflowing fruit juices should be cleaned away immediately, as
fruit stains are more difficult to remove later.
Switch the appliance on with the On/Off switch 9.
■
Clean the appliance housing and the power cable 8 using a lightly mois-
■
tened cloth.
■
12
│
GB │ IE
To avoid receiving an electrical shock, never submerse the motor/
appliance base 7 in water or other fluids.
SFE 450 C3