The Pruning Saw; Guide Rail / Chain Mounting - Trueshopping MT260 Manual Del Usuario

while doing this otherwise the head will
turn indefinitely.
•
The unit is ready for use once the bump
head stops turning.

The Pruning Saw

The pruning saw is designed for cutting
hard to reach branches. It is not designed
to be used in the felling of trees.
The extension pole can be used with the
pruning saw, see the section "pole
attachment" for advice on attaching to
the main engine unit.
**When you are ready to use the pruning
saw, carefully remove the protective
cover. Ensure that the engine is off and
take care when handling as the saw teeth
are sharp **

Guide rail / chain mounting

•
Loosen the nut and remove the
chain guard.
•
Tighten the adjuster with a
screwdriver so that it is all the
way to the right (circled) then sit
the bar in position.
•
Put the chain in place and start
from the top end of the rail,
ensuring that the chain teeth go
around the bar as pictured.
17