•
Finally, position the switch to the "I
"setting on the throttle control.
•
With the plug held against a metal
surface (and ensuring that you have
hold of the rubber plug cover to avoid
electric shock) pull the recoil starter
while observing the gap between the
electrode and the earth contact for a
spark (fig 1)
•
Once the above is complete, reinsert
the spark plug by performing the first
two points in reverse.
Air filter cleaning / exchange
•
Unfasten the retaining cap and
remove the filter cover. **on some
models the retaining cap will instead
be a Philips screw **
25