Jøtul FS 161 Instrucciones Para Instalación página 6

ENGLISH
to fit the flue pipe.
11. Lay the top plate on top (fig. 15 - Z417) and, if needed, a
flue outlet cover (fig. 15 - Z418).
Installing of the high version
(7 heights) - fig. 4
There are two layers of stones in the additional box (Z52-
Z53-Z54).
• The extra heat shield at the back of the surround (high
version) is to be mounted at the bottom with the existing
heat shield above. See fig. 16.
• Place stones Z52-Z53-Z54 on the floor (after levelling the
floor). Then follow the same instructions and order of
installation as for the low version. Remember to attach
the fixing pieces and clamps.
• After the insert has been positioned, the first set of
stones (no. Z52-Z53-Z54) from the additional box can be
laid down, then follow the procedure given for the low
version.
6