Transport Mode; Pc Interface; Cable-Connected Universal Bracket; Measuring The Altitude - Sigma BC 2209 MHR STS Manual Del Usuario

7 GENERAL FUNCtIoNS

7.11 tRANSPoRt MoDE

If the bike is transported on a bike carrier or in the car (if clipped on
the bracket), the BC 2209 MHR will be put into so-called transport
mode by the integrated movement sensor. TRANSPORT appears on
the display. To exit this mode, you must press any button briefly.
2209
Any button must be
pressed briefly

7.12 PC INtERFACE

The BC 2209 MHR is PC-compatible. After purchasing the
SIGMA DATA CENTER SOFTWARE and its Docking Station
(Ref. No. 00432), you can quickly and easily download the total
and daily values onto your PC. Furthermore, you can quickly and
easily set your BC 2209 MHR.

7.13 CABLE-CoNNECtED UNIVERSAL BRACkEt

The BC 2209 MHR can be retrofitted with a cable-connected
universal bracket only for measuring the speed (the cadence
and chest belt remain wireless) Ref. No. 00433.

8 MEASURING tHE ALtItUDE

8.1 INtRoDUCtIoN

The BC 2209 MHR measures the altitude using barometric air pressure. Every change in
weather means a change in air pressure, which can lead to a change of the actual altitude.
In order to compensate for this change in air pressure one must input a reference altitude
in the BC 2209 MHR (the so-called calibration). The BC 2209 MHR has a special function
that makes this calibration almost unnecessary:
BC 2209 MHR 49