Reset Display; Service Interval; Transport Mode; Pc Interface - Sigma BC 1909 HR sTs Manual De Instrucciones

7 GENERAl FUNCTIONS

7.7 RESET DISPlAy

1909
1909
1
k Press MODE1/2 until the desired function is displayed.
1
k Hold down the RESET button. Display flashes. After 2 seconds only the function
displayed is reset to 0.
k Hold down the RESET button for longer than 4 seconds to reset:
2
TRIP DIST, TRIP TIME, AVG. SPEED, MAX. SPEED , AVG. CAD, AVG. PULSE,
MAX. PULSE, KCAL to zero.
7.8 TOTAlS FOR BIKE 1 AND BIKE 2
The totals are first displayed separately for BIKE 1, BIKE 2 and
BIKE 1+2, if a second bike is added. If only one bike is ridden,
only the totals for the first bike are displayed.
1909

7.9 SERvICE INTERvAl

The service interval tells you the mileage until the next bike service
is needed.
The service interval can only be set by your dealer. After reaching
the preset mileage, INSPECTION appears on the display.
Pressing any button makes this display disappear.
1909
Press any button briefly.
20 www.sigmasport.com
4 sec.
1909 1909 1909
2
7 GENERAl FUNCTIONS

7.10 TRANSPORT mODE

If the bike is transported on a bike carrier or in the car (if clipped on
the bracket), the BC 1909 HR will go into transport mode by the
integrated movement sensor. TRANSPORT appears
on the display. To exit this mode, you must press any button briefly.

7.11 PC INTERFACE

The BC 1909 HR is PC-compatible. After purchasing the
SIGMA DATA CENTER SOFTWARE and its Docking Station
(Ref. No.: 00432), you can quickly and easily download the total
and daily values onto your PC. Furthermore, you can quickly and
easily set your BC 1909 HR.

7.12 CABlE-CONNECTED UNIvERSAl BRACKET

The BC 1909 HR can be retrofitted with a cable-connected
universal bracket only measuring speed (the cadence
and chest belt remain wireless) Ref. No.: 00433.
(optional - not included)
1909
Press any button briefly.
BC 1909 HR 21