Metra 98-9000 Manual De Instrucciones página 4

1. Push to close the "Open key"
(Figure A)
2. Insert iPad mini into the case with
the charge connector port matched
with the case's "Open Port"
position, then push iPad mini down
into the case. (Figure B)
3. When the iPad mini is inside the
case, slide the iPad mini to the
left, then press the "Open key" to
ensure the iPad mini is held firmly
by the case. (Figure C).
Continued on next page
Kit Assembly 98-9000
Installing iPad mini (first Gen) into the case
(Figure A)
(Figure B)
(Figure C)
4