Metra 98-9000 Manual De Instrucciones página 7

1. While holding the "gray switch"
to the UNLOCK position, slide the
tablet/phone mount into the pocket
as shown in the diagrams.
2. When the tablet/phone mount
is fully inserted into the pocket,
release the "gray switch" to
LOCK position.
3. Adjust the tilt angle to the
desired position.
4. To remove the mount, hold the gray
switch to the UNLOCK position.
Kit Assembly 98-9000
Installing tablet/phone mount into pocket
First Lock-In position
7
Gray
Lock
Button
Full Lock-In position