Use And Maintenance; Open And Close Buttons; Stop Function; Favourite Position (My) - SOMFY Movelite RTS Manual Del Usuario

EN
2.4.4. Erasing the memory of the motor (Fig M)
This reset deletes all control points, all the sensors and all the end limit settings, and resets the motor's favourite
position (my).
To reset the motor, use a pin to press and hold the PROG button until the motorised product moves 3 times.
All the settings are erased.

3. USE AND MAINTENANCE

This drive is maintenance-free

3.1. OPEN AND CLOSE BUTTONS

Pressing the Open or Close button fully opens or closes the motorised product.

3.2. STOP FUNCTION

The motorised product is moving.
Briefly press my: the motorised product stops automatically.
3.3. FAVOURITE POSITION (
The motorised product is stopped.
Briefly press my: the motorised product starts to move, and stops in the favourite position (my).
To modify or delete the favourite (my) position, see the section entitled "Additional settings"

3.4. ADDITIONAL SETTINGS

3.4.1. Modifying the favourite position (my) (Fig Q)
1) Place the motorised product in the desired favourite position (my).
2) Press my for ≈ 5 seconds until the motorised product moves: the desired favourite position (my) has been pro-
grammed.
3.4.2. Deleting the favourite position (my) (Fig R)
1) Press my: the motorised product starts to move, and stops in the favourite position (my).
2) Press my again until the motorised product moves: the favourite position (my) is deleted.
3.4.3. Adding/Deleting Somfy control points
Refer to the corresponding guide
3.4.4. Modifying the motor rotation direction (Fig S)
Move the motorised product away from the end limits.
1) Press the Open and Close buttons of the RTS control point simultaneously until the motorised product moves.
2) Press the my button until the motorised product moves to reverse the rotation direction.

3.5. TIPS AND RECOMMENDATIONS FOR USE

3.5.1. Questions about the Movelite
Observations
The motorised product
The control point battery is weak.
does not operate.
The motorisation is in thermal protection mode.
If the motorised product still does not work, contact a motorisation and home automation professional.
3.5.2. Replacing a lost or broken Somfy control point
To replace a lost or broken control point, contact a Somfy motorisation and home automation professional.

4. TECHNICAL DATA

Power supply
Radio frequency
Operating temperature
Index protection rating
Safety level
6
(Fig N)
(Fig O)
)
(Fig P)
my
?
TM
Possible causes
Copyright © 2018 SOMFY ACTIVITÉS SA, Société Anonyme. All rights reserved
Solutions
Check whether the battery is weak and
replace it if necessary.
Wait for the motor to cool down.
100V - 240V
433.42 MHz
0°C to + 60°C
IP 30
Class I
.