Setting Up The Remote To Control Your Tv; Using The Room Setup - Pioneer XV-DV900 Manual De Instrucciones

03 Getting started
6 Use the
buttons to set the minute.
7 Press ENTER to confirm.
The display flashes to indicate the clock is set.
• Press TIMER/CLOCK anytime to display
the clock.
• If you unplug the system from the wall
outlet, or there is a power outage, you will
need to set the clock again.
Setting up the remote to control
your TV
You can set up the supplied remote to control
your TV using the TV CONTROL buttons.
1 Switch on your TV.
2 Find the name of the manufacturer of
your TV in the Preset code list on page 88
Next to each manufacturer is one or more
three digit codes. These tell the remote what
kind of TV you have.
If the name of the manufacturer of your TV
does not appear in the table, you won't be
able to set up this remote to control your TV.
3 Point the remote at your TV, hold
down the CLR button, then enter the
three digit code for your TV.
The remote transmits an on/off signal to the
TV. If you've entered the correct code, your TV
should switch off.
If your TV doesn't turn off, repeat the
procedure using the next code in the list until
your TV switches off successfully. Once set,
you can then use the individual TV controls
shown below.
20
En
(cursor up/down)
MASTER
VOLUME
TV CONTROL TV CONTROL
CH CH
BASS MODE DIALOGUE
AUTO SURROUND
PROGRAM REPEAT
Button What it does
Switches your TV on or into
standby.
CH +/–
Changes the TV channel.
VOL +/–
Adjusts the TV volume.
INPUT Switches the TV's input
between the built in TV tuner
and an external video source.
• The default setting is for a Pioneer TV.

Using the Room Setup

Before using your system to enjoy surround
sound playback, we recommend you spend a
few minutes using the Room Setup. This is a
quick and easy way to get good surround
sound for your room.
Depending on the distance of the surround
speakers from your main listening position,
choose between S (small), M (medium), or L
(large) room, then depending on your seating
position relative to the front and surround
speakers, choose Fwd (forward), Mid
(middle), or Back.
VOL VOL
INPUT INPUT
VIRTUAL SB
ADVANCED
RANDOM