Listening To Station Presets; Listening To Other Sources - Pioneer XV-DV900 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Getting started
2
Press SYSTEM SETUP.
3
Use the
(cursor left/right)
buttons to choose 'St. Memory?' then
press ENTER.
4
Use the
(cursor up/down)
buttons to select the station preset you
want.
There are 30 preset locations; each can store
one station preset.
5
Press ENTER to save the station preset.
• If the system is unplugged from the power
supply completely, saved stations will
remain for several days, after which you'll
have to save them again.

Listening to station presets

1
Make sure the TUNER function is
selected.
2
Use the ST +/– buttons to select a
station preset.

Listening to other sources

You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also
Connecting auxiliary components on page 72.
STANDBY/ON
CD
FM/AM
DVD
TUNER
DISPLAY
1
If the system isn't already on, press
STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Select the source you want to listen to.
• Press TV to select the TV input, or use the
LINE (L1/L2) button to select the LINE 1
ANA, LINE1 DIG or LINE 2 ANA input.
3
If necessary, start playback of the
external source.
L1/L2
TV
LINE
OPEN CLOSE
03
29
En

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Xv-dv700S-dv900swS-dv700swS-dv900stS-dv700st

Tabla de contenido