Scott SNOWMOBILE Manual Del Usuario página 7

STANDARDS
CATEGORY
S0
S1
S2
S3
S4
All SCOTT snowmobile goggles comply with the conditions and safety
requirements of Directive 89/686/EEC. Our products are inspected at the
factory in accordance with EN 13178 (version 06/2000) and are type-tested
by Italcert (NB0426), Viale Sarca 336, 20126 Milano, Italy
When used properly, it is assured that:
• No injuries will be caused by sharp edges or protruding elements on the
goggles;
• Eyes will be protected against harmful UV rays;
• The snowmobile goggles – assuming the correct size has been chosen and
the adjustable head strap has been fitted correctly – will protect against
draughts (airflow), snow and ice particles;
• Sufficient air circulation is guaranteed through the foam-covered openings;
• The lenses are optically accurate.
FRAME MARKING
CE
EN13178
LENS MARKING (CE/S1/1)
CE
S1
1
Responsible for development and homologation:
SCOTT Sports SA, Route du Crochet 17, CH-1762 Givisiez
Distribution USA: SCOTT USA Inc., 651 West Critchlow Drive, Ogden, UT
84404, USA
Distribution other countries : SSG (Europe) Distribution Center SA, P.E.D
Zone C1, Rue du Kiell 60, 6790 Aubange, Belgium.
es.
an-
d).
PT_16_MANUAL_SMB Goggle_82x148_V3.indd 7
TRANSMISSION
80% – 100%
43% – 80%
18% – 43%
8% - 18%
3% - 8%
Marking of conformity
Manufacturer's Mark
Indicates compliance with EN13178 a European standard regarding
SNMB Goggles
Marking of conformity
Indication of filter category, see reference table
Indication of optical class
WWW.SCOTT-SPORTS.COM
©SCOTT SPORTS SA 2015. All rights reserved. Rev. 03 of 11.2015.
The information contained in this manual is in various languages
but only the English version will be relevant in case of conflict.
DESCRIPTION
Clear or slightly tinted
(clear lens)
Light filter (light amplifier lens)
Medium universal filter
(amplifier lens)
Dark filter (brown lens)
Very dark filter
7- ENGLISH
16.11.15 11: