Troubleshooting - Klarstein 10031432 Manual Del Usuario

Open panel
1
Pull out the panel to a certain
2
Phenomenon
Indoor unit cannot receive
remote control signal or
remote control has no action.
3
● Use dust catcher or water to
the water (below 45℃ ) to clean
it, and then put it in a shady
and cool place to dry.
4
panel cover tightly.

Troubleshooting

Check items
Whether it's interfered severely
(such as static electricity, stable
voltage).
Whether remote controller is
within the signal receiving range.
Whether there are obstacles.
Whether remote controller is
pointing at the receiving window.
Is sensitivity of remote control
low; fuzzy display or no display?
No display when operating
remote controller.
Solution
Pull out the plug. Reinsert
the plug after about 3min, and
then turn on the unit again.
Signal receiving range is 8m.
Remove obstacles.
Select proper angle and point
the remote controller at the re-
ceiving window on indoor unit.
Check the batteries. If the power
of batteries is too low, please re-
place them.
Check whether remote controller
appears to be damaged. If yes,
replace it.
58