Troubleshooting - Klarstein ICEWIND MAX Manual De Instrucciones

TROUBLESHOOTING

Problem
The appliance is not
working.
The humidifier does not
work / The pump makes
strange noises.
Abnormal noises.
Possible cause
The plug has not been
inserted correctly.
The nebuliser unit
has not been installed
correctly.
The unit is switched off.
The wiring in the unit
has come loose.
No water in the water
tank or the water level is
below the MIN mark.
The filter screen of the
submersible pump is
clogged.
The water outlet hole
of the nebuliser unit is
blocked.
The pump or the wiring
in the unit has come
loose.
Deposits in the nebuliser
unit.
Loose fan blades or
motor damage.
Solution approach
Plug the power plug
securely into the wall
socket.
Install the nebuliser unit
correctly.
Switch the device on.
Contact a specialist
company for repairs.
Switch off the device and
fill water into the water
tank.
Clean the filter screen.
Clean the nebuliser unit.
Contact a specialist
company for repairs.
Remove the nebuliser
unit and clean the
components.
Contact a specialist
company for repairs.
EN
35