Prepare The Installation - Broan Elite E661 Instrucciones De Instalación

2. PREPARE THE INSTALLATION

Make sure that the following items are included:
- Hood
- Accessories:
• Filters (2 for 30'' and 36'' width hoods, 3 for 42'' width hood)
• Plastic diverter (assembled in hood)
• 3¼" x 14" adapter/damper (inside one filler)
• Bag of parts (inside one filler) including:
1 wire clamp, 6 no. 8 x 1/2" screws, 2 wire connectors and 3 no. 6 x 1/2" standard screws
• Shielded halogen lights (MR16, GU10, 120 V, 50 W)
Parts sold separately:
- Transition 3¼" x 14" to 8" round model no. 459 (optional), transition 3¼" x 14" to 7" round model no. T460
(optional), adapter/damper 3¼" x 14" to 3¼" x 10" model no. T461 (optional), ducts, elbows, dampers, wall or roof caps.
NOTES: 1. During installation, protect countertop and/or cooktop.
2. If the bottom of the cabinet is recessed, attach four 1'' wide wood strips (not included), as shown below, in
order to properly attach the hood to the cabinet. The wood strips must be as thick as recess.
Cut-out the openings for duct (A) and power cable (B), in cabinet or wall, according to the direction of discharge
chosen.
See figures below.
NOTE: If using the optional 3¼" x 14" to 3¼" x 10" adapter model no. T461, the duct opening width (A) will be 10½",
centered.
H
ORIZONTAL DISCHARGE
A
3½"
7¼
HD0121A
CABINET BOTTOM
1"
1"
1 ¾ ' '
HO0028A
C L
7
"
8
3"
B
7¼
" "
1½ dia.
"
1"
10¼''
5¼''
1 ¾ ' '
V
4¼''
7/8''
HD0120A
- 4 -
1"
ERTICAL DISCHARGE
CABINET BOTTOM
1½''
A
7/8"
B
2''
C L
7¼'' 7¼''
2''