Hold; Placing A Call On Hold; Releasing A Call Onh; Lash - GE 29472 Manual De Instrucciones

H
OLD
Hold allows you to suspend the active line(s), replace the handset on the
cradle without hanging up, then resume your conversation on the same
phone or a different phone connected to the same line.
P C
LACING A ALL ON
1. Press the HOLD button. The indicator for the line on hold flashes green.
2. Hang up or press another line button.
The phone emits a beep every 30 seconds as a reminder. At a separate
29472 unit, which is connected to the same line, the LINE indicator blinks
red, but no beep is heard.
R C
ELEASING A
Press the button for the line on hold. The phone automatically goes into
speakerphone mode.
NOTE: If you want to change modes, lift the handset to switch to the handset, or
press the HEADSET button to use the headset.
NOTE: The call on hold can be picked up at a different phone connected to
the same line using this procedure.
F

LASH

Use the FLASH button to activate custom calling services such as call waiting
or call forwarding, which are available through your local phone company.
R

EDIAL

1. Pick up the handset, or press the SPEAKER button, or press a line button.
2. The line is automatically selected. (For headset, press the button for the
line you want to use.)
3. Wait for a dial tone then press REDIAL.
NOTE: The redial function will not operate if the number to be redialed
contains more than 32 digits. If the number is longer than that, you will hear
an error tone.
NOTE: Each press of the FLASH button occupies a digit space.
H
OLD
H
ALL ON OLD
23