Hold; Paging Thec - GE 25880 Guia Del Usuario

Corded Handset
1. Lift the corded handset.
2. Press the redial button.
- Or -
3. Press the redial button first, then lift the corded handset.
If you get a busy signal, and want to keep dialing the number, press the
redial button to quickly redial the number.
Cordless Handset
1. Press talk/end/call back button.
2. Press the redial button.
- Or -
3. Press the redial button then press the talk/end/call back button.
If you get a busy signal, and want to keep dialing the number, press the
redial button to quickly redial the number again.

Hold

Press the hold button on the base to put a call on hold.The hold indicator
light turns on.
To take a call off hold, press the hold button again, and the hold indicator
light turns off.
• To switch a call on hold from the base to the cordless handset, press
talk/end/call back on the cordless handset.
If you continue the call on a separate extension phone, your phone releases
the line to the extension phone, and the hold indicator light turns off.
Paging the Cordless Handset
This feature helps you locate a misplaced handset.
Press and release the page/intercom button on the base. The display shows
PAGING HANDSET.The cordless handset beeps continuously and displays
PAGING FRM BASE for about two minutes or until you press talk/end/
call back on the cordless handset or press page/intercom on the base.
NOTE: You may still page the cordless handset even if the ringer is turned off.
21