Using The Tools; After Using The Vacuum Cleaner - ARIETE AQUA force 2481 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
E N

USING THE TOOLS

Telescopic tube (Z)
This is particularly useful for reaching high or hidden areas (under furniture, sofas, beds, etc.). It fits
directly onto the attachment on the handgrip (T).
Push the sliding device (X) forwards and pull out the bottom section of the tube until it is the required
length (Fig. 10). Then simply release your grip and the device will return to its original position.
Crevice tool (V)
This is recommended for specific areas (crevices in furniture or on chairs or sofas) where suction
would otherwise be difficult. It can either fit to the attachment on the handgrip (T) or to the tube (Z).
Round brush (U)
This serves to remove dust from delicate surfaces such as picture frames, books, etc., with its soft
bristles. It can either fit to the attachment on the handgrip (T) or to the tube (Z).
Liquid cleaning brush (N)
This serves for cleaning up liquids from hard surfaces such as floors as well as from carpets or rugs.
It guarantees a perfect suction action on liquids, leaving surfaces perfectly dry and it also offers an
excellent dry suction action.
Use it with rubber scrapers on hard surfaces and without on carpets and rugs (Fig. 11).
To use this brush move it forwards or back to allow the rubber scrapers to slide freely.
It can either fit to the attachment on the handgrip (T) or to the tube (Z).
Floor brush (O)
This tool can be used on any type of surface. Use the device on the top part to:
t retract the bristles when cleaning carpets or rugs;
s lower the bristles when cleaning smooth flooring such as PVC or tiles.
Parquet floor tool (P)
This fits to the floor brush (O) for efficient parquet floor cleaning.

AFTER USING THE VACUUM CLEANER

Switch off the appliance after use by pressing the footsoperated switch (L), with your hand or foot.
After this, unplug the appliance and wind the cord back inside its housing by holding down the foot
operated rewinder button (h). The cord will rewind itself immediately inside its housing.
WARNING: While rewinding the power cord, guide it in the right direction by hand to prevent any risk
of injury to yourself.
- 1 -

Publicidad

Tabla de contenido
loading

Tabla de contenido