Care And Maintenance - Project Source 252-K825-PS-SSD Manual Del Usuario

ASSEMBLY INSTRUCTIONS
5. Unscrew plastic bottle from soap dispenser assembly (C). Insert
body assembly of soap dispenser (C) through selected hole in
sink (6.1). Secure soap dispenser body assembly (C) to sink with
nut (6.2) from underneath sink. Screw the bottle onto the body
soap dispenser assembly shank (6.3). Insert pump down into
body assembly.
6. To fill, lift the soap dispenser head and pump assembly (B) out
of the bottle (7.1) and pour no more than 8 oz. of liquid soap
(7.2 not included) into bottle. Replace soap dispenser head
and pump assembly (C).
OPERATING INSTRUCTIONS
The lever handle controls the flow of either hot or cold water to the faucet.
Rotating the handle either forward or backward controls the cold (forward) or hot (backward) flow of water.
Moving the handle out from the faucet body (right) opens the cartridge and causes water to flow out from
the spout. The degree of handle opening determines the volume of water flow. Returning the handle
to the original position (towards the faucet body) stops the flow of water.

CARE AND MAINTENANCE

Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these
will dull the finish and void your warranty.
5
5
6
B
7.1
Lowes.com
B
6.1
6.2
6.3
7.2